Danfoss VLT AQUA Drive FC 202 Operating Instructions Manual page 46

How to Install
4.2.4 Potentiometer Reference
Voltage reference via a potentiometer
Reference Source 1 = [1] Analog input 53 (default)
Terminal 53, Low Voltage = 0 V
Terminal 53, High Voltage = 10 V
Terminal 53, Low Ref./Feedback = 0 RPM
4 4
Terminal 53, High Ref./Feedback = 1500 RPM
Switch S201 = OFF (U)
44
Operating Instructions
Illustration 4.23 Potentiometer Reference
Danfoss A/S © Rev. 06/2014 All rights reserved.
Speed RPM
39 42 50 53 54
P 6-15
Ref. voltage
P 6-11 10V
1 k
55
MG20Y202