Shutting Down The Machine - CUDA Series 2840 Operator's Manual

Shutting Down The Machine

To shut down the machine at the end of the day:
• set the wash cycle timer to OFF;
• set the heater timer to OFF; and
• shut off the compressed air at the supply line
(if installed).
WARNING: If the heater is left on unattended, the
wash solution could evaporate and the oil and
grease in the sump chamber could catch fire.
AVERTISSEMENT: Si le chauffe-eau est laissé sous
tension sans surveillance, l'eau pourrait
s'évaporer et l'huile et la graisse dans la chambre
de lavage pourrait prendre feu.
• For periods of extended shut-down, disconnect
all power to the machine.
NOTE: Perform rust preventative treatment on mild
steel units prior to extended storage.
• If your machine is equipped with an optional 24-
hour, 7-day heater timer, periodically verify the
settings to prevent inadvertent unattended
operation.
Cuda 2840 Operator's Manual 8.930-370.0 - AU
Operations
21