CUDA Series 2840 Operator's Manual page 13

7. (If Optional Deluxe Kit Installed):
After the machine stops, remove the right sump
cover and transfer approximately two gallons of
wash solution into the detail sump using a small
submersible pump or a suitable container.
WARNING: Hot cleaning solution could cause
serious injury. Always wear rubber gloves and
approved eye protection when handling hot
cleaning solution.
AVERTISSEMENT: Une solution de nettoyage chaude
haute pression pourrait causer des blessures graves.
Toujours porter des gants en caoutchouc et une
protection oculaire approuvée lors de la manutention
de solution de nettoyage chaude.
8. Replace all sump covers.
When the machine stops, and after the wash water
reaches operating temperature, it is ready for use.
Refer to Section 3: Operation for complete
operating instructions.
Cuda 2840 Operator's Manual 8.930-370.0 - AU
Operations
13