Adjusting The Rf Settings - "Rf Configuration - Sennheiser WiCOS Instruction Manual

Adjusting the RF settings –
Setting the RF signal strength – "General"
The RF signal strength of the conference system can be set in two different
ways:
• automatic setting of the RF signal strength (recommended)
• manual setting of the RF signal strength
In the main navigation, click
The "General RF settings" overview screen appears.
To set the RF signal strength to
In the "Room size" box, select the "(Auto)" option button.
Click "Save settings".
The setting is saved. The RF signal strength is automatically adapted to
the operating conditions/room size.
To manually set the RF signal strength:
In the "Room size" box, select the appropriate option button:
Option button RF signal strength
"Big" maximum RF signal
strength
"Medium" medium RF signal
strength
"Small" low RF signal strength
Click "Save settings".
The setting is saved. The RF signal strength is set to the selected power.
Setting the frequencies – "General"
The frequency selection of the conference system can be set in two
different ways:
Configuring the conference system
"RF configuration"
"RF Configuration".
automatic mode:
Area of application
large rooms of
approx. 3000 m²
medium sized rooms of
approx. 2000 m²
small rooms of
approx. 1000 m²
53