Sennheiser WiCOS Instruction Manual page 39

C CV D DV
:
:
C CV D DV
6
C CV D DV
Assigning a participant the "speaking right"
If – in "With Request" or
the microphone key on his conference unit, he makes a request to speak.
All participants who have made a request to speak will join a request-to-
speak list. On the conference unit, the microphone LED
and the signal light ring
2
made a request to speak.
To assign the "speaking right" to the next participant from the request-to-
speak list using the WiCOS C and WiCOS CV chairman units:
Press the NEXT key 6.
The next participant from the request-to-speak list is assigned the
"speaking right". As long as you keep the key
to the key lights up.
In stand-alone operation, the "speaking right" can only be
assigned using the WiCOS CV and WiCOS C chairman units.
Conference control via the web server is not possible.
Ending a discussion
Using the cancel function, the chairman can end a discussion at any time.
Briefly press the priority key 5.
All conference units are muted. The request-to-speak list is not cleared.
As long as you keep the key
up.
5
"With Req. No Clear" mode – a participant presses
2
flashes red, indicating that the participant has
6
5
pressed, the LED next to the key lights
Running a conference
0
flashes green
pressed, the LED next
37