Sennheiser WiCOS Instruction Manual page 43

C CV D DV
9 8
C CV D DV
CV
7
C
C CV D DV
9 8
7
N
If you are using the
conference unit and the voting result cannot be displayed. You can
nevertheless conduct voting session.
Via the web server, set the function of the selection key A
to "Start/Stop Voting" (see page 65).
Start or stop voting session and delete voting results using the
8
selection key A
As long as you keep the key
light up.
With the WiCOS C chairman unit, you cannot participate in the
voting session yourself.
Setting the volume of the conference units' loudspeakers
With the WiCOS CV or WiCOS C chairman units, you can set the loudspeaker
volume of all conference units.
If you are using the
Keep the ABSTAIN key
for loudspeakers" is shown on the multi-function display 7.
The multi-function display switches between "voting mode", "volume
adjustment mode for loudspeakers" and "media control mode".
You can also switch between the operating modes using the
web server (see page 65).
Press the
– selection key A
– selection key B
7
The loudspeaker volume is changed. The multi-function display
shows the volume of the conference units' loudspeakers N.
If you are using the
Via the web server, set the function of the selection key A
to "Volume Control" (see page 65)
WiCOS C chairman unit, the set operating mode of the
9
and B (for more information, see page 38).
8 9
or pressed, the LEDs next to the keys
WiCOS CV chairman unit:
C
pressed until the "volume adjustment mode
8
to increase the loudspeaker volume or
9
to reduce the loudspeaker volume.
WiCOS C chairman unit:
Running a conference
8 9
and B
7
8 9
and B
41