Sennheiser WiCOS Instruction Manual page 61

Conference mode Speaker limit
"Direct access"
1 to 8 (factory
default setting:
(factory default
4)
setting)
"FIFO" 1
"Override" 1 to 8
"Group 1" 1
"Group 2" 2
"Group 3" 3
"Group 4" 4
By pressing the microphone
A
key ...
... you can take the floor
immediately – provided that
the speaker limit has not yet
been reached.
If the speaker limit has been
reached, you have to wait until
one of the current speakers has
finished speaking.
... you can take the floor
immediately.
The microphone of the previous
speaker is switched off.
... you can take the floor
immediately.
The microphone of the speaker
who is speaking for the longest
time is switched off.
.... you can take the floor
immediately – provided that
the speaker limit has not yet
been reached.
If the speaker limit has been
reached, you will join the
request-to-speak list. You will
automatically be assigned the
"speaking right" as soon as
another speaker has finsished
speaking.
Setting the volume of the conference units' built-in loudspeakers
In the main navigation, click
The "General Conference
in the "Volume" box, click the "Up" or the "Down" button.
– "0" = off
Configuring the conference system
Cancellation of a
Chairman unit
request to speak
not required –
not required –
not required –
not required possible
"Conference management".
Settings" overview screen appears.
59