Sennheiser WiCOS Instruction Manual page 17

8
9
C
Voting mode
"Start/Stop Voting"
L M
Volume adjustment mode for
loudspeakers "Volume Control"
N
Media control mode
"Function key"
O P
Multi-function display 7 of the WiCOS CV chairman unit
The multi-function display
To switch between the operating modes and displays:
Press the ABSTAIN key
You can switch between the following modes and displays:
– Voting mode
– Volume adjustment mode for loudspeakers
– Media control mode
7
Depending on the mode, the selection key A
9
key B are assigned different functions.
You can also switch between the operating modes using the web
server (see page 65).
Display
L
Start
M
Stop
Display
N
Volume of the
conference units'
loudspeakers
Display
O
Media control 1
P
Media control 2
The display has an automatic brightness control. Approx. 4 seconds after
the last key press, the brightness will be reduced. With each key press, the
display will light up with maximum brightness.
7
can display three different operating modes.
C
for approx. 3 seconds.
("Start/Stop Voting")
("Function key").
Function/Meaning
9
Selection key B starts a voting session
8
Selection key A stops a voting session
Function/Meaning
Adjusted volume of the conference units' loudspeakers
8
Selection key A increases the volume
9
Selection key B reduces the volume
Function/Meaning
8
Selection key A controls external media devices
9
Selection key B controls external media devices
Overview of the components
("Volume Control") and
8
and the selection
K
15