Apple MacOS X operating system
If you are using
Apple MacOS
IP address (see also the instruction manual of the operating system):
Click the "Apple" icon and select "System Preferences".
The "System Preferences" window opens.
Click "Network".
The "Network" window opens.
From the "Show" drop-down list, select "Built-in Ethernet".
Click "Configure...".
The "Built-in Ethernet" window opens.
From the "Configure IPv4" drop-down list, select "Manually".
In the "IP address" field, type your desired IP address, e.g.
192.168.0.12.
In the "Subnet mask" field, type the subnet mask 255.255.255.0.
Both addresses have to be within the address range of the access point.
Do
not use
the IP address of the access point: 192.168.0.10.
Confirm your entries by clicking "Apply now".
Configuring the conference system
X, proceed as follows in order to set a static
47