Sennheiser WiCOS Instruction Manual page 34

Switching the components on/off
C CV D DV
3s
:
: A
NT-BA
C CV D DV
X
]
32
Configuration Function/Meaning
Setting the To initialize the conference units on
initialization mode of the access point
the conference units
Encryption mode To set the encryption mode for radio
transmission
To manually switch a conference unit off:
Press the microphone key
The conference unit switches off. All LEDs and displays go off.
To automatically switch all conference units off:
Switch the access point off (see page 29).
If there is no connection to an access point, the conference units will
automatically switch off after 2 minutes.
To completely switch a conference unit
power supply:
If necessary, unplug the charging power supply from the wall socket.
Remove the battery pack from the conference unit (see page 27).
A
for 3 seconds.
off and disconnect it from the
Detailed
information
see page 57
see page 67