Sennheiser WiCOS Instruction Manual page 50

Configuring the conference system
48
Accessing the access point (overview screen)
Make sure the network communication between access point
and computer is not blocked by a proxy server and/or a firewall.
Switch the access point on (see page 29).
Start a web browser (e.g. Internet Explorer or Firefox).
In the address box of the browser, type the IP address of the access
point: the factory default IP address 192.168.0.10 or your adapted IP
address.
Press the Enter key or click the "Refresh" button of your web browser.
The web server appears in the browser window and prompts for a
password.
If you have not assigned a password:
Type the default password "123" into the entry field.
Click "OK".
The "Summary" overview screen of the web server appears.
If you have assigned a password (see page 52):
Type the password into the entry field.
Click "OK".
The "Summary" overview screen of the web server appears.
If you have forgotten the password, you can reset the access
point to the factory default settings in order to be able to access
the web server (see page 44).
Attention: If the access point is reset, any custom settings will
be lost!