Sennheiser WiCOS Instruction Manual page 60

Configuring the conference system
Conference mode Speaker limit
"With request"
1 to 8
"With request no
clear"
58
In the "Maximum number of active
desired option button.
The number of simultaneously active microphones can be between "1"
and "8".
Click "Save settings".
The setting is saved. The speaker limit is set to the selected value.
Regardless of the conference mode and speaker limit set, the
following applies:
• With a chairman unity you can take the floor immediately
without first having to be assigned the "speaking right".
• Active chairman units are not counted against the speaker limit.
Setting the conference mode
The WiCOS conference system offers different conference modes, allowing
you to tailor a conference to your needs.
In the main navigation, click
The "General Conference
In the "Microphone Mode" box, select the desired option button.
Refer to the table below for more information on the individual
conference modes.
Click "Save settings".
The setting is saved. The conference system is set to the selected
conference mode.
By pressing the microphone
A
key ...
... you make a request to speak
and join the request-to-speak
list. You can only take the floor
after you have been assigned
the "speaking right".
microphones" box, select the
"Conference management".
Settings" overview screen appears.
Cancellation of a
Chairman unit
request to speak
possible
required –
assigns the
not possible
"speaking right"