Command Set - ICP DAS USA I-7080 User Manual

2.

Command Set

General Command Set
Command
%AANNTTCCFF !AA
#AAN
~**
~AA0
~AA1
~AA2
~AA3ETT
~AAO(name)
$AA2
$AAF
$AAI
$AAM
Frequency Command Set
Command
$AAB
$AABS
$AA1H
$AA1H(data)
$AA1L
$AA1L(data)
I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 22
Response
>(data)
No Response Host OK
!AASS
!AA
!AATT
!AA
!AA
!AATTCCFF Read configuration
!AA(data)
!AAS
!AA(data)
Response
!AAS
!AA
!AA(data)
!AA
!AA(data)
!AA
Description
Set module configuration
Read counter or frequency Sec. 2.2
Read Module Status
Reset Module Status
Read Host Watchdog Timer Sec. 2.6
Enable Host Watchdog
Timer
Set module name
Read firmware number
Read the value of INIT* pin Sec. 2.35
Read the module name
Description
Read input mode
Set input mode
Read high trigger level
Set high trigger level
Read low trigger level
Set low trigger level
Reference
Sec. 2.1
Sec. 2.3
Sec. 2.4
Sec. 2.5
Sec. 2.7
Sec. 2.9
Sec. 2.18
Sec. 2.34
Sec. 2.36
Reference
Sec. 2.32
Sec. 2.33
Sec. 2.14
Sec. 2.15
Sec. 2.16
Sec. 2.17