ICP DAS USA I-7080 User Manual page 23

General Counter Command Set
~AAAS
$AA0H
$AA0H(data)
$AA0L
$AA0L(data)
$AA1H
$AA1H(data)
$AA1L
$AA1L(data)
$AA3N
$AA3N(data)
$AA4
$AA4S
$AA5N
$AA5NS
$AA6N
$AA7N
$AAA
$AAAG
$AAB
$AABS
@AADI
@AADO0D
@AAGN
@AAPN(data)
I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 23
!AA Set counter alarm mode
!AA(data) Read min. width of High Sec. 2.10
!AA Set min. width of High
!AA(data) Read min. width of High Sec. 2.12
!AA Set min. width of High
!AA(data) Read high trigger level
!AA Set high trigger level
!AA(data) Read low trigger level
!AA Set low trigger level
!AA(data) Read max. counter value Sec. 2.19
!AA Set max. counter value
!AAS Read filter status
!AA Set filter status
!AAS Read the counter status
!AA Set the counter status
!AA Reset counter
!AAS Read overflow status
!AAG Read gate mode
!AA Set gate mode
!AAS Read input mode
!AA Set input mode
!AAS0D00 Read D/O & alarm state Sec. 2.37
!AA Set D/O value
!AA(data) Read preset value
!AA Set preset value
Sec. 2.8
Sec. 2.11
Sec. 2.13
Sec. 2.14
Sec. 2.15
Sec. 2.16
Sec. 2.17
Sec. 2.20
Sec. 2.21
Sec. 2.22
Sec. 2.23
Sec. 2.24
Sec. 2.25
Sec. 2.26
Sec. 2.30
Sec. 2.31
Sec. 2.32
Sec. 2.33
Sec. 2.38
Sec. 2.44
Sec. 2.45