Aado0D - ICP DAS USA I-7080 User Manual

2.38 @AADO0D

: Set digital output.
Description
: @AADO0D[chk](cr)
Syntax
@ is a delimiter character
AA=2-character HEX module address, from 00 to FF
D=0 D/O0=D/O1=OFF
=1 D/O0=ON, D/O1=OFF
=2 D/O0=OFF, D/O1=ON
=3 D/O0=D/O1=ON
[chk]=2-character checksum, if checksum disable
(cr)=0x0D
: valid command
Response
invalid command
alarm is enable
no response
error or address error
! is a delimiter character indicating a valid command
? is a delimiter character indicating a invalid command
AA=2-character HEX module address
[chk]=2-character checksum, if checksum disable
(cr)=0x0D
Example
:
command: @01DO00(cr)
response : !01(cr)
command: @02DO01(cr)
response : !02(cr)
NOTE: if the alarm is enable, the D/O 0 & D/O 1 will be
always controlled by module. Therefore the following D/O
commands will be ignored.
power-on value is changed to hi/lo condition immediately
the @AADO0D command is ignored.
I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 62
7080/7080D
!AA[chk](cr)
?AA[chk](cr)
?AA[chk](cr)
syntax error or communication
Turn all D/O OFF.
Turn D/O 0 ON.
Turn D/O 1 OFF.
no [chk]
no [chk]