Table of Contents
Advertisement
2.27
$AA8
: Read the LED configuration.
Description
: $AA8[chk](cr)
Syntax
$ is a delimiter character
AA=2-character HEX module address, from 00 to FF
[chk]=2-character checksum, if checksum disable
(cr)=0x0D
: valid command
Response
invalid command
no response
error or address error
! is a delimiter character indicating a valid command
? is a delimiter character indicating a invalid command
AA=2-character HEX module address
S=0
show counter/frequency channel 0
1
show counter/frequency channel 1
2
HOST control
[chk]=2-character checksum, if checksum disable
(cr)=0x0D
Example
:
command: $018(cr)
response : !010(cr)
command: $028(cr)
response : !021(cr)
command: $038(cr)
response : !032 (cr)
I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 51
!AAS[chk](cr)
?AA[chk](cr)
syntax error or communication
LED show the value of channel 0.
LED show the value of channel 1.
HOST control the LED display.
7080D
no [chk]
no [chk]
Advertisement
Table of Contents
