AUMA SA 07.2 Operation Instructions Manual page 61

SA 07.2 SA 16.2/SAR 07.2
AC 01.2 Intrusive
Valve attachment
Sensor system
Indication for manual operation
(option)
1) For nominal voltage and 40 °C ambient temperature and an average load with running torque or modulating torque according to sepa-
rate technical data. The type of duty must not be exceeded.
Technical data for limit and torque switches
Mechanical lifetime
Silver plated contacts:
U min.
U max.
I min.
I max. AC current
I max. DC current
Gold plated contacts:
U min.
U max.
I min.
I max.
Technical data for blinker transmitter
Mechanical lifetime
Silver plated contacts:
U min.
U max.
I max. AC current
I max. DC current
Technical data for handwheel activation switches
Mechanical lifetime
Silver plated contacts:
U min.
U max.
I max. AC current
I max. DC current
SAR 16.2 Control unit: electromechanic
Standard: B1 according to EN ISO 5210
Options:
A, B2, B3, B4 according to EN ISO 5210
A, B, D, E according to DIN 3210
C according to DIN 3338
Special output drive types: AF, B3D, ED, DD, IB1, IB3
A prepared for stem lubrication
Indication whether manual operation is active/not active via switch (1 change-over contact)
6
2 x 10 starts
30 V AC/DC
250 V AC/DC
20 mA
5 A at 250 V (resistive load)
3 A at 250 V (inductive load, cos phi = 0.6)
0.4 A at 250 V (resistive load)
0.03 A at 250 V (inductive load, L/R = 3 µs)
7 A at 30 V (resistive load)
5 A at 30 V (inductive load, L/R = 3 µs)
5 V
30 V
4 mA
400 mA
7
10 starts
10 V AC/DC
250 V AC/DC
3 A at 250 V (resistive load)
2 A at 250 V (inductive load, cos phi ≈ 0.8)
0.25 A at 250 V (resistive load)
6
10 starts
12 V DC
250 V AC
3 A at 250 V (inductive load, cos phi = 0.8)
3 A at 12 V (resistive load)
Technical data
61