Guarantee Terms - Hakki Pilke 43 Pro Instructions For Assembly, Operation And Maintenance

The saw bar is not lowered
fully when the cutting button is
pressed.

6. Guarantee terms

"Guarantee terms come into force when you register your customership on the extranet service found
on our website."
The guarantee is valid for the original buyer for 12 months, starting from the date of purchase, but for no
more than 1,000 operating hours.
In guarantee matters, always contact the machine's seller before undertaking any procedures.
A guarantee claim must be issued to the seller in writing immediately upon discovery of a defect. If the
defect concerns a damaged part or component, please send a photograph of the damaged part or
component to the seller, if possible, so the fault can be identified. When submitting a guarantee claim,
the buyer must always include the type and serial number of the machine in the claim and present a
receipt that includes the date of purchase. Guarantee claims must be submitted to an authorised retailer.
The guarantee covers
 Parts damaged in normal use due to faults in the material or workmanship.
 Reasonable repair expenses in accordance with the agreement between the seller or buyer and
the manufacturer. Faulty parts will be replaced with new ones. A faulty part or parts replaced due
to a material fault must be returned to the manufacturer via the retailer.
The guarantee does not cover
 Damage caused by normal wear and tear (such as blades and belts), improper use or use contrary
to the instruction manual.
 Damage caused by negligence of maintenance or storage procedures detailed in the instruction
manual.
 Damage caused during transport.
 Cutting blades, V-belts and oil as well as normal adjustment, care, maintenance or cleaning
procedures.
 Defects in a machine to which the buyer has carried out or commissioned structural or functional
changes, to the degree that the machine can no longer be considered equivalent to the original
machine.
 Other potential costs or financial obligations resulting from the procedures mentioned
 above.
 Indirect costs.
 Travel costs resulting from guarantee repairs.
 The guarantee for parts replaced during the guarantee period of the machine expires at the same
time as the machine's guarantee.
Hakki Pilke 43 Pro
47 / 48
4. Burnt fuse in the 12 V relay
box.
1. The lowering valve has
been adjusted shut.
10 item D.
2. Saw dust or debris under
the saw drive end
Translation
of the burnt fuse, and
replace the fuse after
repairs.
1. Open the adjustment by
Figure one rotation
2. Clean
Version 6-2018