Using A Sawdust Removal Device; Operating The Machine; Performing A Test Run On The Machine - Hakki Pilke 43 Pro Instructions For Assembly, Operation And Maintenance

21 / 48
3.2.6.

Using a sawdust removal device

Figure 17.1
A hydraulic sawdust removal device is available for the machine as an accessory. It allows you to
collect sawdust for other purposes. The sawdust removal device is automatically activated when
the machine starts up.
However, you can deactivate it when necessary by turning lever A to the OFF position, as shown
in Figure 18.

4. Operating the machine

4.1. Performing a test run on the machine

The machine may not be used before a test run has been performed and all the functions of the machine
have been tested. Both the test run and testing can only be performed by a person who has studied the
machine's manual.
Note! When turning on the machine in cold weather (-5°C or colder), it is recommended that you use a
separate heater for oil (accessory). In addition to this, the machine needs to be idled without work
motions until the oil temperature has increased sufficiently.
Hakki Pilke 43 Pro Translation Version 6-2018