Connecting A Log Table's In-Feed Rollers To The In-Feed Conveyor - Hakki Pilke 43 Pro Instructions For Assembly, Operation And Maintenance

larger out-feed conveyor, use the
controller in position I (Figure 10).
Note! If the machine has a larger out-
feed conveyor, use of the log lifter is
prohibited, as the control valve uses a
motor spool.
4.3.7.
A log table's (e.g. HakkiFeed 472) in-feed rollers can be connected in series with the in-feed conveyor. The
rollers automatically synchronise with the in-feed conveyor when logs are fed with joystick F (Figure 10)
or when feed assist mechanism B is being used. The hoses of the log table in-feed rollers are connected to
the machine's in-feed conveyor as follows:
1. Turn off the machine
and disconnect
from the
source.
2. Remove hose B from
quick coupling
(Figure 21).
3. Connect the pressure
hose of the log table
rollers (marked in red)
to quick coupling A.
4. Connect the return
hose of the log table
rollers to hose B (with
a female coupling).
Hakki Pilke 43 Pro

Connecting a log table's in-feed rollers to the in-feed conveyor

it
power
A
26 / 48
Figure 21.
Translation Version 6-2018