Using The Out-Feed Conveyor - Hakki Pilke 43 Pro Instructions For Assembly, Operation And Maintenance

3.2.4.
The Hakki Pilke 43 firewood processor's out-feed conveyor belt is driven by a hydraulic motor. To change
the speed of the belt, use adjuster H (Figure 10). The conveyor can be turned sideways hydraulically with
lever E (Figure 10) as follows:
- Lever forwards: the conveyor turns to the left.
- Lever backwards: the conveyor turns to the right.
When using a smaller conveyor:
- The conveyor is adjusted to the desired angle with winch A, as shown in Figure 17.
When using a larger conveyor: (with lever E in Figure 10)
- Lever to the left: the conveyor's angle to the ground increases
- Lever to the right: the conveyor's angle decreases
Hakki Pilke 43 Pro

Using the out-feed conveyor

Figure 17.
Translation
19 / 48
Version 6-2018