Table of Contents
Advertisement
3.1.1.
Place the in-feed conveyor in the
operating position as follows:
1. Ensure
that
room is available to lower
the
in-feed
(approx. 2 m).
2. Release the locking by
lifting latch A from shaft B
(Figure 3).
3. Lower
the
conveyor to the lower
position with the winch,
as shown in Figure 4.
Note! Make sure that the in-feed
conveyor's support leg settles
properly into place.
4. Remove cotter pin B and
pull out locking pin A
(Figure 5).
Hakki Pilke 43 Pro
Placing the in-feed conveyor in the operating or transport position
sufficient
conveyor
in-feed
10 / 48
Figure 3.
Figure 4.
Translation
Version 6-2018
Hide quick links:
Advertisement
Table of Contents
