Control Functions And Setting Up The Machine; Arranging The Machine For Operation And Transport - Hakki Pilke 43 Pro Instructions For Assembly, Operation And Maintenance

A. In-feed conveyor
B. Control panel
C. Cutting and splitting unit
D. Out-feed conveyor
Note! The pushbar lugs may be installed either way depending on the size of the tractor.

3. Control functions and setting up the machine

3.1. Arranging the machine for operation and transport

Before arranging the machine for operation and using it, ensure that the operating conditions, detailed in
Section 1.4, are met and review the safety instructions in Section 1.5.
Note! Inspect and clean the machine according to Sections 4.3 and 5.8 before arranging it for transport.
Hakki Pilke 43 Pro
9 / 48
Figure 2. Main components of the machine
Translation Version 6-2018