Main Components Of The Machine - Hakki Pilke 43 Pro Instructions For Assembly, Operation And Maintenance

8 / 48
Figure 1b. Lifting points of the machine for chains (3 pcs).
When connecting the machine to a tractor's lifting equipment, there must be no one in the tractor cabin,
so as to prevent any accidental contact with the controls. Check all the connecting devices of the tractor
and the firewood processor before connecting them. Never use faulty equipment. The pins that are used
to connect the pushbars and drawbars to the machine must be of the correct size, and the appropriate
locking pins must be used to secure them.
The machine must be placed in the transport position if it is to be moved more than 5 metres. Exercise
extreme caution when moving the machine in the operating position. Always lower the machine to the
ground when you stop.
Note! Incorrect lifting may cause a hazardous situation or damage the machine.

2.3. Main components of the machine

The Hakki Pilke 43 is a firewood processor with fully hydraulic controls. In other words, all of the
machine's functions are controlled hydraulically with operating levers on the machine's control panel. The
guard of the cutting and splitting section is interlocked with the machine's operation: Opening the guard
stops the cutting and splitting functions.
Hakki Pilke 43 Pro Translation Version 6-2018