Table of Contents
Advertisement
3.2.3. Adjusting the log length
The Hakki Pilke 43 has a hydraulic measuring device for cutting firewood, with an adjustment value of
approx. 20 to 60 cm.
When sawing, the limiter plate for logs (B in Figure 16) always moves approx. 5 cm backwards with the
help of a hydraulic cylinder to ensure that the log does not get jammed and is able to freely fall on top of
the guide plates or, alternatively, directly into the splitting groove.
1.
Turn the machine off and open the machine's guard.
2.
Adjust the log length limiter to the desired length by releasing the lock in Figure 16 to the
open position (as shown in the smaller figure) and sliding limiter plate B to the desired
position.
3.
Turn lock A in Figure 16 back to the closed position.
4.
If necessary, you can fine tune the measuring device to the desired position by turning nut C
(Figure 16). Tightening the nut results in the log length being lengthened and vice versa. (If
the log length is standard, you can fine tune the log length to minimise the amount of waste
wood).
Hakki Pilke 43 Pro
18 / 48
Figure 16. Log length adjustment
Translation
Version 6-2018
Hide quick links:
Advertisement
Table of Contents
