4.18 Online mode
Caution
Risk of injury due to uncontrolled movements of the connected actuators.
Test projects and programs without active actuators and without compressed air initially.
A configured project including program (CECC-X application) is to be transferred to the controller. Online
mode must be activated for transfer, i.e. CODESYS must be "logged in" on the controller.
4.18.1 Login
Use one of the following commands for login:
–
Click the icon in the toolbar of the CODESYS program window
–
Menu command [Online] [Login]
–
Shortcut ALT+F8
CODESYS logs in to the controller connected via the active path in the gateway.
The first step is a comparison of whether the connected controller is the same as the target system
selected in the project. An error message appears if there is a conflict Controller variants.
Figure: Warning message about an incorrect target system ID
The next step is a comparison of the project and the application on the controller. The following query
appears if the project has been changed.
Figure: Query if the versions are different
Decide how to handle the version differences between the CODESYS project and the application
CODESYS online Help, "Login".
The connection with the controller is indicated in the CODESYS device window by the green bars:
–
Device [connected] (CECC-X-M1/-MV/-MV-S1)
–
Application
Festo controller CECC-X-M1-...
63