Connecting To A Pc; Figure 6: Rs-232 Control Via The Tp-780T/R - Kramer TP-780T User Manual

4.2

Connecting to a PC

You can connect to the transmitter/receiver system via an RS-232 connection
using, for example, a PC.
Note: A null-modem adapter/connection is not required.
To connect a PC via RS-232:
•
Connect the RS-232 9-pin D-sub rear panel port on the transmitter/receiver
system unit via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and
pin 5 to pin 5 need to be connected) to the RS-232 9-pin D-sub port on your
PC.
Figure 6
TP-780R, via a PC connected to the TP-780T:

Figure 6: RS-232 Control via the TP-780T/R

14
shows RS-232 bidirectional control of the projector that is connected to
TP-780T/R - Connecting the TP-780T/R