Table of Contents
Advertisement
5
Connecting the PT-571
You can use the PT-571HDCP DVI Line Transmitter with the PT-572HDCP+
DVI Line Receiver to configure a DVI transmitter/receiver system.
To connect the PT-571HDCP to the PT-572HDCP+, as illustrated in the
example in
1. Connect the CAT 5 OUT RJ-45 connector on the PT-571HDCP to the
CAT 5 IN RJ-45 connector on the PT-572HDCP+ via a CAT 5 cable
(see section 5.1).
2. On the PT-571HDCP, connect a DVI source (for example, a computer
graphics source) to the DVI IN connector.
3. On the PT-572HDCP+, connect the DVI OUT connector to a DVI
acceptor (for example, a display).
4. Connect the 12V DC power adapter to the power socket on the
PT-571HDCP or the PT-572 HDCP + and connect the adapter to the
mains electricity (not shown in
Figure 3: Connecting the PT-571HDCP/PT-572HDCP+ DVI Line Transmitter/Receiver
Connecting the PT-571HDCP and PT-572HDCP+
Figure
3, do the following:
and PT-572
HDCP
Figure
3).
HDCP+
7
Advertisement
Table of Contents
