3.4
Defining the TP-780T HDMI Line Transmitter + POE
Figure 1: TP-780T HDMI Line Transmitter + POE
#
1
IN LED
2
OUT LED
3
LINK LED
4
ON LED
5
HDBT OUT RJ-45 Connector
6
HDMI IN Connector
7
PROG/NORMAL Switch
8
RS-232 9-pin D-sub
Connector
9
IR 3.5mm Mini Jack
Connector
10
48V DC Terminal Block
TP-780T/R - Overview
Feature
Lights green when an HDMI input device is connected
Lights green when an HDMI output device is detected
Lights green when the TP connection is active
Lights green when receiving power
Connects to the HDBT IN RJ-45 connector on the
TP-780R
Connects to the HDMI source
Slide to PROG to upgrade to the latest Kramer
firmware via RS-232, or slide to NORMAL for normal
operation
Connects to an RS-232 port for firmware upgrade and
control of the destination unit
Connects to an external infrared transmitter / sensor
(receiver)
+48V DC connector for powering the unit
Function
7