Remote Control Unit; Maintenance; Welding Torch - Kemppi Protig 410 Operation Instructions Manual

5.

REMOTE CONTROL UNIT

R10
R20
R10F
Foot pedal control unit for TIG welding
- Start operation
- Control for welding current with movement on pedal
- Limiting of welding current range with min. and max. potentiometers (reference scale 1...10).
6.

MAINTENANCE

The amount of use and the working environment should be taken into consideration when plan-
ning the frequency of maintenance of Protig 410 unit. Careful use and preventive maintenance
will help to ensure trouble-free operation.
6.1.

WELDING TORCH

Due to high temperatures and wear the welding end of TIG torch requires most maintenance, but
also condition of other parts should be checked regularly.
Welding end
Check that...
- all insulations of welding end are undamaged and at their place.
- gaz nozzle is undamaged and suitable for work.
- flow of shielding gas is free and even.
- electrode is undamaged. Use electrode size and tip sharpening angle which is suitable for
welding case. Make sharpening grinding lengthwise of electrode.
- fastening parts of electrode are undamaged and electrode is fastened tightly at ist place.
© KEMPPI OY
Control of welding current min. ...max.
Control of welding current min. ...max.
No operation
PROTIG 410 / 0537 – 19