Preface; Introduction; Product Introduction; Operation Control And Connectors - Kemppi Protig 410 Operation Instructions Manual

1.

PREFACE

1.1.

INTRODUCTION

Congratulations on having purchased this product. Properly installed Kemppi products should
prove to be productive machines requiring maintenance at only regular intervals. This manual
is arranged to give you a good understanding of the equipment and its safe operation. It also
contains maintenance information and technical specifications. Read this manual from front to
back before installing, operating or maintaining the equipment for the first time. For further
information on Kemppi products please contact us or your nearest Kemppi distributor.
The specifications and designs presented in this manual are subject to change without prior
notice.
In this document, for danger to life or injury the following symbol is used:
Read the warning texts carefully and follow the instructions. Please also study the Operation
safety instructions and respect them when installing, operating and servicing the machine.
1.2.

PRODUCT INTRODUCTION

Protig 410 is a TIG ignition unit for demanding professional use. The unit is controlled by means
of a microprocessor and ignition spark is generated by means of thyristors.
These operation instructions are for Protig 410 ignition unit, assembly and installation of
TIG equipment as well as panel functions. In addition instructions describe assembly of
Mig/TIG/MMA equipment, cables and main operations of installation.

1.2.1. Operation control and connectors

Start connection
of torch
Air-cooled torch
Switch for air-
/liquid-cooled
torch
X11 Welding current connections Supply -
X12 Welding current connections Supply +
X13 Earth connection
X14 Connection of welding torch
X15 Connection for control cable Pro power source
X16 Connection for control cable Procool
X17 Connection for control cable Remote control unit
X18 Start connection
© KEMPPI OY
Liquid-cooled torch
Cooling liquid connection,
welding torch
X14
X17
X13
X12
X11
Remote control unit
X18
X15
X16
Shield gas
Cooling
liquid
PROTIG 410 / 0537 – 3