Wol Speed - Allied Telesis 2914 Series Installation And User Manual

WOL Speed

The WOL Speed property allows you to specify the speed of Wake-on-
LAN on your adapter port. This speed does not affect the speed of the
fiber connection to your network.
To view this setting, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 51.
2. Select WOL Speed in the Property box.
The WOL Speed page is displayed as shown in Figure 40.
3. Select one of the following options:
10 Mb — The speed of Wake-on-LAN is 10 Mbps.

100 Mb — The speed of Wake-on-LAN is 10 Mbps.

Auto — The speed of Wake-on-LAN is auto negotiated.

Lowest Speed Advertised — This is the default setting.

4. Click OK.
Figure 40. WOL Speed Page
Chapter 4: Modifying Advanced Properties
79