Arp Offload - Allied Telesis 2914 Series Installation And User Manual

ARP Offload

The ARP Offload feature enables the adapter not to wake up when
responding to an ARP request. ARP is used to verify whether a computer
is still present on the network and resolute an IP address into a MAC
address.
To enable or disable the ARP Offload feature, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 51.
2. Select ARP Offload in the Property box.
The ARP Offload page is displayed as shown in Figure 22.
3. Select one of the following options:
Disable — This feature is disabled.

Enable — The adapter does not wake up when responding to an

ARP request. This is the default setting.
4. Click OK.
Figure 22. ARP Offload Page
Chapter 4: Modifying Advanced Properties
53