2914 Series Fiber Network Adapters with WoL Installation and User's Guide
Checking the Port LED on the Adapter
86
The 2914 series network adapter comes with one LED. The LED indicates
the link status for the c port.
Note
Before the port LED can provide troubleshooting information, the
driver software for your particular operating system must be installed
and the adapter must be connected to the network. See Chapter 3,
"Installing the Driver Software" on page 37.
Table 3 describes the link status that LED's indicate.
State
On
Valid link.
Off
No link.
Flashing
The port is receiving or transmitting network packets
Table 3. LED Status
Description