Allied Telesis 2914 Series Installation And User Manual page 32

2914 Series Fiber Network Adapters with WoL Installation and User's Guide
32
Warning
The module is being installed in a system that operates with
voltages that can be lethal. Before you remove the cover of your
system, you must observe the following precautions to protect
yourself and to prevent damage to the system components.
– Remove any metallic objects or jewelry from your hands and
wrists.
– Make sure to use only insulated or nonconducting tools.
– Verify that the system is powered OFF and unplugged before
accessing internal components.
– Installation or removal of modules must be performed in a static-
free environment. The use of a properly grounded wrist strap or
other personal antistatic devices and an antistatic mat is strongly
recommended.
5. Applying even pressure at both corners of the network adapter, push
the adapter until it is firmly seated in the PCIe slot.
Make sure the adapter is securely seated. See Figure 11 on page 32.
Figure 11. Inserting the Network Adapter
Caution
Do not use excessive force when seating the adapter, as the force
may damage the system or the adapter. If the adapter resists
seating, remove it from the system, realign it, and try again.
E39

E47
