Priority & Vlan - Allied Telesis 2914 Series Installation And User Manual

Priority & VLAN
The Priority & VLAN feature allows you to control sending and receiving
tagged frames of QoS and VLAN.
When the property is set to Priority & VLAN Enabled, the adapter sends
and receives QoS and VLAN tagged frames; with Priority Enabled, the
adapter sends and receives QoS tagged frames; with VLAN Enabled,
the adapter sends and receives VLAN tagged frames. To assign a VLAN
ID to the adapter, see "VLAN ID" on page 76.
To enable or disable the Priority & VLAN feature, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 51.
2. Select Priority & VLAN in the Property box.
The Priority & VLAN page is displayed as shown in Figure 32.
Figure 32. Priority & VLAN Page
3. Select one of the following options:
Priority & VLAN Enabled — The adapter sends and receives

QoS and VLAN tagged frames. This is the default setting.
Priority & VLAN Disabled — The adapter does not send and

ignores QoS and VLAN tagged frames.
Chapter 4: Modifying Advanced Properties
67