2914 Series Fiber Network Adapters with WoL Installation and User's Guide
Ethernet@WireSpeed
54
The Ethernet@WireSpeed feature connects two devices even when the
devices are connected through an impaired copper cable.
Note
This feature is valid only for copper ports. Because the port of the
2914 series network adapter is a fiber connector, the setting is
always disabled.
To view the Ethernet@WireSpeed setting, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 51.
2. Select Ethernet@WireSpeed in the Property box.
The Ethernet@WireSpeed page is displayed as shown in Figure 23.
Figure 23. Ethernet@WireSpeed Page
3. Click OK.