Speed & Duplex; Figure 35: Speed & Duplex Page - Allied Telesis AT-2911SX/ST User Manual

Chapter 3: Modifying Advanced Properties
Speed & Duplex
70
The Speed & Duplex feature sets the link speed and duplex mode of the
adapter with a twisted pair copper interface.
Note
This feature is valid only for copper ports. For fiber connectors, the
setting is always Auto.
To change the Speed & Duplex property, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 43.
2. Select Speed & Duplex in the Property box.
The Speed & Duplex page is displayed as shown in Figure 35.
Figure 35. Speed & Duplex Page