Installing The Driver Software - Allied Telesis 2914 Series Installation And User Manual

2914 Series Fiber Network Adapters with WoL Installation and User's Guide

Installing the Driver Software

42
Once you physically install the 2914 series network card, the system
detects the new hardware and creates an entry in Device Manager when
the Windows operating system first boots up. Shortly after you log in, you
need to install the driver software for your adapter card.
Note
To install the driver software, you must have administrative
privileges.
To install the driver software, do the following:
1. Access Device Manager. see "Accessing Device Manager" on
page 41.
2. In the Device Manager window, double-click Network Adapters to
expand the field.
3. Right-click Allied Telesis AT-2914 Series Fiber Ethernet.
Note
Device Manager my list your adapter entry as an Ethernet
Controller, Broadcom NetXtreme device, or Allied Telesis device.
The shortcut menu appears. See Figure 16 as an example.
Figure 16. Selecting the 2914 Series Adapter in Device Manager