Updating The Driver Software - Allied Telesis 2914 Series Installation And User Manual

Chapter 3: Installing the Driver Software

Updating the Driver Software

If your operating system automatically installs a default driver or Broadcom
driver, you need to update the driver software with the driver that you
downloaded from the Allied Telesis website. To obtain the latest version of
the AT-2914 network adapter driver, see "Downloading the Driver
Software" on page 39.
To update the driver software, you use the same procedure for installing
the driver software for the first time. The only difference between updating
and installing the driver software is the name of your adapter that Device
Manager detects and lists.
Device Manager lists your adapter card entry as Allied Telesis AT-2914
Series Fiber Ethernet once you installed the driver software. Before you
installed the driver software, Device Manager may list your adapter entry
as an Ethernet Controller, Broadcom NetXtreme device, or Allied Telesis
device.
To update the driver software for your AT-2914 network adapter, see
"Installing the Driver Software" on page 42.
45