Control Panel - Kemppi A3 MIG Operating Manual

3.2 Control panel

The control panel is used for controlling and monitoring the operation of the
power source and the wire feeder. The buttons and knobs are used for adjusting
functions. The displays and indicators reflect the operating modes of the machine.
2
3
4
5 6
Figure 3.4 Control panel layout
1. Miscellaneous functions
2. Displays
3. System and welding setup
4. Synergic program selection
5. Welding process selection
6. Welding program setup
7. Memory channel setup
8. Robot control indicator
9. Control knobs
1
9
7 8
© Kemppi Oy 2018
6
A3 MIG Welder 1826