Introduction; General - Kemppi A3 MIG Operating Manual

1.

INTRODUCTION

1.1 General

Congratulations on choosing the A3 MIG Welder system.
When used correctly, Kemppi products can significantly
increase the productivity of your welding and provide
years of economical service.
This operating manual contains important information
on the use, maintenance and safety of your Kemppi prod-
uct. The technical specifications of the equipment can be
found at the end of the manual.
Please read the manual carefully before using the equip-
ment for the first time. For your own safety and that of
your working environment, pay attention to the safety
instructions in the manual.
For more information on Kemppi products, contact
Kemppi Oy, consult an authorized Kemppi dealer, or visit
the Kemppi web site at www.kemppi.com.
The specifications presented in this manual are subject to
change without prior notice.
Important notes
Items in the manual that require attention in order to
minimize damage and harm are indicated by the sym-
bols below. Read these sections carefully and follow their
instructions.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in
damage to the equipment or system.
Warning: Describes a potentially dangerous situation.
If not avoided, it will result in personal damage or fatal
injury.
Disclaimer
While every effort has been made to ensure that the infor-
mation contained in this guide is accurate and complete,
no liability can be accepted for any errors or omissions.
Kemppi reserves the right to change the specification of
the product described at any time without prior notice.
Do not copy, record, reproduce or transmit the contents
of this guide without prior permission from Kemppi.
© Kemppi Oy 2018
3
A3 MIG Welder 1826