Installation - Kemppi A3 MIG Operating Manual

2.

INSTALLATION

The product is packed in specially designed transport
cartons. However, always make sure the products have
not been damaged during transportation prior to this.
Product packaging material is recyclable.
When moving the welding machine, never pull it
from the welding gun or other cables. For lifting the power
source, use the handles on top of the power source.
Detailed installation instructions and the technical
information that is out of the scope of this manual are
found in the A3 MIG Welder Integration guide.
Operating environment
The machines included in the system are suitable for both
indoor and outdoor use. Always make sure that the air
flow to the machine is unrestricted. The recommended
operating temperature range is -20...+40°C.
Positioning the machines
Place the machine on a sturdy, level surface that is dry
and will not allow dust or other impurities to enter the
machine´s cooling air flow. Preferably, situate the ma-
chine in a suitable carriage unit so it is above floor level.
• The surface inclination may not exceed
15 degrees.
• Ensure the free circulation of the cooling air.
There must be at least 20 cm of free space in
front of and behind the machine for cooling-air
circulation.
• Protect the machine against heavy rain and
direct sunshine.
Do not operate the machine in the rain.
Never aim the spray of sparks from a grinding
machine toward the equipment.
© Kemppi Oy 2018
4
A3 MIG Welder 1826