Status, Warning And Error Messages; Status Messages - TESTO 6681 Profibus Instruction Manual

testo 6681 Profibus
84
1.5 Status, warning and error
messages

1.5.1 Status messages

Status messages show the current operating mode of the testo 6681.
Message
00300 New limit value
00301 Scaling changed
00500 Transmitter reset:
0052F Reset Min/Max
02506 Probe connection
01D19 Service plug
00307 User Setting Change

- 1.5 Status, warning and error messages

To achieve optimum operational reliability (machine
availability), the transmitter provides the following via the user
menu (see chapter 1.4, page 66) or the P2A software (see
volume 2, chapter 2, page 97):
Status messages,
Warning messages and
Error messages
for either the testo 6681 or the connected testo 661x probe
as applicable.
All messages are stored in the transmitter with an operating
hours stamp. Use the user menu (see chapter 1.4.6.7, page
79) or P2A software (see volume 2, chapter 2, page 97) to
view the message history.
In the transmitter, the last 160 messages are stored in a ring
memory, but there is no restriction in the P2A software.
Display
The limit value has been changed or shifted
The scaling has been changed
The transmitter was reset to the factory settings
and is restarted.
Resets all saved Min/Max values for all channels
A probe has been connected
The Mini-DIN socket is connected to: the USB
adapter for P2A software, the adjustment
adapter or the service plug (is not recorded/no
number)
User Setting Change: General settings were
changed for the transmitter.
Description