Configure Profibus Module Using Edd - TESTO 6681 Profibus Instruction Manual

1.3.5 Configure Profibus module using EDD

1.3.5.1 Start parameterizing software
The following description of the configuration using the
Process Device Manager (PDM) refers to the stand-alone
version of the Siemens Simatic PDM software.

The project planning and parameterization tool Siemens Simatic PDM
can be master class 2 (at least version 6.0 SP2).
1 Start the software Simatic PDM
The program window is opened.
2 In the right selection window, select the testo 6680 by double clicking.
The Simatic PDM - User dialogue is opened.
3 Select:
Maintenance engineer to read out the settings of the testo 6681 or
Specialist to parameterize the measurement channels (see Section Menu
item Output, chapter 1.3.5.3, page 50).
4 Confirm with [OK].
testo 6681 Profibus
- 1.3 Commissioning 49