TESTO 6681 Profibus Instruction Manual page 50

testo 6681 Profibus
50
1.3.5.2 Overview of user interface
1
1.3.5.3 Menu items
Menu items
Operation
unit
Device
- 1.3 Commissioning
2
Explanation
Entry of the exact designation of the measuring point.
Selection of the identification number with which the
instrument registers on the Profibus.
You may select:
Manufacturer-specific
Instrument registers itself with the identification
number 0A8A
For commissioning the instrument in cyclical data
communication, the manufacturer GSD is required.
Profile-specific
Instrument registers itself with the identification
number 9701
For commissioning the instrument in cyclical data
communication, the corresponding profile GSD of the
Profibus user organization (PNO) is required.
The individual menu items are
shown in a tree structure in
the left selection window (1).
In the right selection window
(2) input fields can be opened
by clicking on the white fields
(3) with the right mouse
button.
When settings are changed,
status (4) changes from Initial
val to Changed.
4
3
.
hex
.
hex