testo 6681 Profibus
52
1.3.5.5
Parameter settings
In the Output menu item you can perform the parameter settings. To simplify
the multitude of entry steps, an entry assistant is available for this.
Start assistant
Select Device > Menu Transmitter setup in the menu bar.
The dialogue is opened.
Instrument settings tab
- 1.3 Commissioning
Important:
The address of a subscriber may only be assigned once.
Repeated assignment leads to bus faults.
Changing parameterizations is only possible when the write
protection of the variables is removed.
If the write protection is activated, the settings can only be
shown.