Mounting Instructions - FibberservCL FSSEG-X3 User Manual

3.3 Mounting instructions

1. Make sure that the surface is clean to ensure good bonding.
2. Peel off the liner on the double-sided tape and place the sensor on the door/window. Be sure
that the two sensor parts should be within 1/8" of each other when the door/window is closed.
Please refer to the mounting example below.
4. FAQ
Q1. How can I return the device to factory default settings?
A1: Press and hold the reset button until the LED flashes red three times.
Refer to FCL TRAINING MANUAL - PRODUCT SPECS for Technical
!
specifications.