Table of Contents
Advertisement
!
Tip: You can also press the "Z" button of the gateway for two seconds until the LED indicator turns
solid blue.
Step 3: Use a pin key tool to press and hold the reset button for two seconds until the LED flashes
green to add it to the system.
The LED will turn solid for a while when pairing is successful.
Ensure it is successful added by checking the app.
!
Step 4: Install the device
Note: The position of the device effects the range and performance of the sensor. Please see
sensing range 2.4 and 2.5
Option 1: Please ensure all surfaces are clean, dry, flat and the temperature is over 10c before
attempting to place the devices, or the adhesive will not be fully effective.
Advertisement
Table of Contents
