FibberservCL FSSEG-X3 User Manual page 13

!
2. Get started
21. To get started, you will need:
FSSEG-X3 Smart Gateway
•
FSIPC804 IP Camera
•
The Fiberserv mobile app
•
2.2 Set up your IP camera
1. Connect your IP camera to the USB power adaptor and apply power.
2. The LED indicator will flash blue after the IP camera is powered on. If not, reset the camera by
pressing the reset button for three seconds.
3. Go to the video module !
QR code on the back of the IP camera (you can also manually input the device ID under the QR
code), then tap "Next".
4. For Android, the mobile phone will now connect to the IP camera's Wi-Fi hotspot automatically.
For iOS, go to Settings and choose the IP camera's Wi- Fi and go back to the app.
5. From a list of available Wi-Fi networks, choose a network and enter the password on the next
screen to connect the IP camera to the internet.
6. Once connected to the internet, the IP camera will be added to the mobile app automatically.
You are now able to see live video from the camera.
Refer to FCL TRAINING MANUAL - PRODUCT SPECS for Technical specifications.
of the mobile app, tap the QR code icon ! Scan the